National Firebird and Trans Am Club Message Board

Technical Areas => Electrical Items => Topic started by: february2021 on February 02, 2021, 04:10:42 PM

NFTAC website home page or NFTAC Photo Gallery or NFTAC Club Blog
Subscribe in a reader
Join or renew today and receive a free t-shirt or tech CD, see details in the join the club section at www.firebirdtaclub.com!

Title: BCM/ECM Connections
Post by: february2021 on February 02, 2021, 04:10:42 PM
Does anyone ever perform some kind of maintenance on their BCM /ECM connections. I was thinking I would at least just disconnect and reconnect a couple times to maybe help ensure a good connection.  Maybe spray some cleaner? Any thoughts?
Since I have owned the car my low coolant light is on more often than not, even though itís not low. I always assumed a bad sensor.
I just thought I possibly had an intermittent connection at the module.

Probably just wishful thinking it could be that easy.

Henry Howard
Title: Re: BCM/ECM Connections
Post by: firebirdclub on February 02, 2021, 04:18:49 PM
Iím very much of the, ďif it ainít broke, donít fix it,Ē mind-set when it comes to electrical connectors. But if I had a problem, I would try cleaning all the connections first.
Mo Chinski

NFTAC website home page or NFTAC Photo Gallery or NFTAC Club Blog