National Firebird and Trans Am Club Message Board

Technical Areas => Questions and Answers => Topic started by: november2021 on November 15, 2021, 12:21:13 PM

NFTAC website home page or NFTAC Photo Gallery or NFTAC Club Blog
Subscribe in a reader
Join or renew today and receive a free t-shirt or tech CD, see details in the join the club section at www.firebirdtaclub.com!

Title: Rear Hatch Alignment
Post by: november2021 on November 15, 2021, 12:21:13 PM
Any recommendations on how to fix the hatch from hanging past the quarter panels on my 3rd generation Trans Am. I know itís because the hatch struts push it out over time but Iím not sure.

Dylan Stallings
Title: Re: Rear Hatch Alignment
Post by: firebirdclub on November 15, 2021, 12:29:27 PM
You need to unbolt the hatch and remove the old urethane.  Apply new urethane, then realign and retighten the hatch through the glass nuts at the deck lid.

Justin Sumuda

NFTAC website home page or NFTAC Photo Gallery or NFTAC Club Blog