NFTAC website home page or NFTAC Photo Gallery or NFTAC Club Blog
Subscribe in a reader
Join or renew today and receive a free t-shirt or tech CD, see details in the join the club section at www.firebirdtaclub.com!

Author Topic: 1977 Trans Am 400 cid (Shaker) Intake Manifold Help  (Read 9427 times)

0 Members and 1 Guest are viewing this topic.

7TransAM7

  • Message Board Member but not a NFTAC Club Member
  • *
  • Posts: 2
1977 Trans Am 400 cid (Shaker) Intake Manifold Help
« on: September 13, 2010, 11:40:01 PM »
Hi there i am new here i need to know if there are any other Intakes for my 1977 Trans Am It has a Shaker Hood but i am not sure of what other type of Intake it needs so that the Shaker works on it.

It came with an aftermarket and obviously it does not fit it.

Thanks

Aby help

4SPEED

  • NFTAC Member
  • Message Board Member not current NFTAC Club Member
  • **
  • Posts: 342
  • Ohio Firebird Member
  • Firebird or Trans Am informaton: '79 white Trans Am
Re: 1977 Trans Am 400 cid (Shaker) Intake Manifold Help
« Reply #1 on: September 18, 2010, 05:48:06 AM »
any pontiac intake will work from the 70's.   is your 400 a L78 or the W72 ? 
remember you must use a pontiac Q-jet carb to make it fit right. 
also the edelbrock part # 2156  intake will fit.

see link
http://firebirdclub.net/smf/index.php?topic=1177.0

edelbrock, made to look stock



stock 78 W72 intake on a 77 W72motor not in the car yet.



National Firebird and Trans Am Club Message Board

Re: 1977 Trans Am 400 cid (Shaker) Intake Manifold Help
« Reply #1 on: September 18, 2010, 05:48:06 AM »


 

NFTAC website home page or NFTAC Photo Gallery or NFTAC Club Blog