NFTAC website home page or NFTAC Photo Gallery or NFTAC Club Blog
Subscribe in a reader
Join or renew today and receive a free t-shirt or tech CD, see details in the join the club section at www.firebirdtaclub.com!

Author Topic: Repairing Plastic Heat and Duct Pieces  (Read 3331 times)

0 Members and 1 Guest are viewing this topic.

february2015

  • Message Board Member not current NFTAC Club Member
  • **
  • Posts: 11
Repairing Plastic Heat and Duct Pieces
« on: March 08, 2015, 10:15:35 PM »
Whatís the best material to use for repairing plastic heat and AC duct pieces? I just discovered the duct directly below the glove compartment cracked and separated on my Ď71 TA. Someone must have accidentally kicked it getting in and out. Would two stage poxy work? Advice and suggestions greatly appreciated.
 
G-Ray Williams

firebirdclub

  • National Firebird and Trans Am Club
  • Firebird & Trans Am Club Administrator
  • *****
  • Posts: 658
  • National Firebird and Trans Am Club
    • National Firebird and Trans Am Club
Re: Repairing Plastic Heat and Duct Pieces
« Reply #1 on: March 08, 2015, 10:15:59 PM »
Mine had tried to be glued by the previous owner. You can spend $10-15 on some epoxy ... or $99 on the new duct from eBay, Performance Pontiac, NPD, etc. Thatís my $.02.

Rob Davis
National Firebird and Trans Am Club
website: www.firebirdtaclub.com
email: info@firebirdtaclub.com
phone/text: 773-769-7166

North America's oldest and largest club for all Firebirds and Trans Ams including GTAs and Firehawks.  Established in 1984 and offers color magazines (EAGLE), emagazines, technical advice, free member classifieds, member repair shop recommendations and much more!

National Firebird and Trans Am Club Message Board

Re: Repairing Plastic Heat and Duct Pieces
« Reply #1 on: March 08, 2015, 10:15:59 PM »


 

NFTAC website home page or NFTAC Photo Gallery or NFTAC Club Blog