News:

Join or renew today and receive a free t-shirt, tech (CD/USB drive/emailed)
 or past Eagles (CD/USB drive/emailed)
, see details in the "Join the Club" section at www.firebirdtaclub.com

Main Menu

NFTAC website home page or NFTAC Photo Gallery or NFTAC Club Blog

Join or renew for 3 years and receive a free t-shirt
or tech sections on USB flash drive /emailed/CD or past Eagle issues on USB flash drive/emailed/CD
see details in the join the club section at www.firebirdtaclub.com!


67 centerlink replacement

Started by GeoffN, September 26, 2006, 03:17:39 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

GeoffN

 I have a 67 'Bird that sombody has already converted the centerlink/idlerarm/pitmanarm to reverse polarity. The stock idler arm and pitman arm have male ends and my current setup has female ends. My problem is that even if I wanted to convert back to stock, I can't find an idler arm. Any suggestions? :-\


Bill Simcox

Stock steering components are readily available. Pitman arm from National Parts Depot (800-874-7595) part number depends on P/S vs, manual. Tie rod ends and idler arm available through local NAPA store.  NPD also has a rack & pinion bolt on changeover. Not cheap though. Near a thousand dollars.

Bill

back to NFTAC website home page or NFTAC Photo Gallery or NFTAC Club Blog