Category Archives: Members’ Cars and Photos

’76 Formula of Judge Gene Fierro

A featured car of the National Firebird and Trans Am Club is the ‘76 Formula of Judge Gene Fierro from Palmetto Bay, Florida. Here is his story:

My ‘76 California built Firebird Formula started its life with a smog chocked factory 350 and tranny. 42 years later this award winner has been transformed into a street pounding hot looking South Beach beauty featuring a rare and authentic ‘71 TA 455 HO with 700R transmission making 475 hp and 500 in torque .

This street friendly, reliable cruiser is highlighted by all desirable engine parts including Edelbrock, Melling, Quickfuel Carb, MSD, SS headers and custom made Mandrel bent exhaust system!

It features a sensational red paint job, modern drivetrain and suspension as well as power disc brakes, power steering, power windows, SS gas tank, custom gauge panel and tach, sequential tail lights, US Mag 17″ rims with Nitto tires and a rear gear making street and highway driving flawless and fun.

The rebuilt factory AC and large radiator have it running cool in the (305). The dealer installed power sunroof makes the cruise even more enjoyable! As for the performance and sound? – well you be “the Judge of that!”

“…Old School, Hard Core!”

Trans Ams of William Paul Skelton

After four long and arduous years of medical school, to celebrate my graduation, my father purchased a brand new 1983 red Trans Am with a 5.0L 305 V8. I instantly fell in love with the car. I felt part of the car each time I sat in the cockpit and drove it and still do. The car and I went everywhere together. Over the years, I have used it for every important picture backdrop in my life. We have used it for our outside wedding pictures, when our children came home from the hospital after birth, the first day of school for each child, when friends came over, scouting accomplishments, religious milestones, graduations, etc. I have a wonderful mechanic who knows me and I tell him to “make it new again” and he does. I will never sell my 1983 Trans Am. The blue 1990 fuel injected 5.0L 305 V8 is also a dream car.

When my son turned 16, I could think of no other gift to get him than to get another 3rd generation Trans Am for him. Here is to him recording all of his future memories.

Here are pictures of my three Trans Ams. My 1995 is an LT1 and only has 3,100 miles, my 1990 is a WS6, my 1983 is completely original, no mods, and completely unrestored.


Mark Guerin’s Firebirds

I got my first Firebird when I was 17 years old and it was a 1973 Firebird Esprit, Navajo Orange 350 CID engine. I blew that motor and installed a Pontiac 400 CID rebuilt engine. I blew up that motor just before I went to college and could not afford another motor. My bicycle went to college with me and when I graduated I was heartbroken to have to sell my Esprit. My wife and I purchased the 1972 Blue Formula in 1997. Its VIN is 2U87N2N506556. Its correct color should be Cameo White with Black top. The engine is a 1971 Pontiac 400 CID. My wife and I started our business and the car rebuild was put on hold for 4 years. As I became busy and the car sat I decided to have a local shop build the brakes and they convinced me to rebuild the engine. The shop sent the engine out of state and as of today I put the specifications in a location I cannot locate.
The shop installed a Torker II high rise manifold with a Edelbrock carb. Consequently the hood would not close and after a long debate I requested the Pontiac manifold be installed. The shop then could not find the manifold, The shop did nothing to clean up the engine bay before installing the engine so I took the car as is. I do most of my mechanical work myself.
The 1973 Trans Am was purchased 4 years ago. It has original paint and 55,000 miles, factory or dealer eight track player, The sun roof was installed by the original owner in 1992 in Florida. I have rebuilt the brakes and done minor detailing. The last owner masked or I should say attempted to mask off the engine and spray paint anything black that he thought should be black. I am cleaning that paint off. The 1973 Formula 400 Ram Air was purchased December of 2016. The previous owner’s family has a large auto body shop in Albuquerque, Quanz Advanced Auto care, This car had a body off restoration 5 years ago with the engine rebuilt at 90,000 miles. It has a four speed manual transmission. It also has a few bugs with the lights.
My interest in Pontiacs came about as all my high school friends wanted Camaros, Mustangs, Chevelles, etc.. My mother’s cousin owned a Pontiac dealership and I would go drool over the Firebirds, GTOs and Lemans. They had a Brewster green 1968 convertible on the show room floor. I begged to purchase that car which they sold in 2005 with 250 miles on the odometer.

3rd Generation Collection of Ken & Josh Travis from Candler, North Carolina

This issue’s featured car is actually more than one and is the collection 3rd generation Firebirds and Trans Ams of Ken and Josh Travis from Candler, North Carolina. Here is the story:

I have been a member of the club since I acquired my first 1991 Trans Am Convertible, which has been a few years now. I am submitting the following saga and a few pictures for your interest and consideration.

I purchased my first car when I was 14 years old. The year was 1964. The car was a beautiful 1952 Pontiac 2-door Catalina hardtop – no door posts or door window frames. The straight eight was internally damaged, and I spent my summer break from high school being caked in black gunk as I worked on the engine and EVENTUALLY brought it back to life. I have been an auto enthusiast ever since! I later owned a sweet 1956 Pontiac two-door hardtop Catalina Custom, and then a fabulous 1963 Grand Prix. Chief Pontiac has been in my blood almost all my life. Apart from the 3rd generations that have taken up residence here, I drive a 2006 G6 GTP Coupe when the weather is fair and I’m not wearing shop clothes. My daily go-to most everything car is a sweet little 2000 Pontiac Sunfire Coupe. Even after a gazillion miles it still runs like a little hot dog on its original 2.2L 4-piston pumper.

I ended up working for a major manufacturing corporation as a mechanical manufacturing engineer. Working on cars just naturally falls into the realms of professional expertise. Reading technical drawings, working with extremely tight tolerances, most aspects of industrial plating and paint finishes has aided me well in my passion for preserving these wonderful cars.

With intense enthusiasm, my son Josh works side-by-side with me. He is exceedingly methodical while working with fit, finish and assemblies. I am blessed, as he is a walking encyclopedia of GM part numbers, torque specs and possesses a wealth of parts sources in his head. Accurate research is his forte. He likes the smaller “fiddly” tasks, I love building the engines and other mechanical systems.

Josh and I affectionately refer to our present collection of 3rd generation F-Bodies as members of our Bird Coup, a throw-back from Fire “bird” and the “Screaming Chicken”, which now number eight in the garages! There are (3) 1991 Trans Am Convertibles, (1) 1992 Trans Am Convertible, (1) 1992 Formula 350 T-Top, (1) 1991 Formula 350 Hardtop (at present under full nuts and bolts restoration), (1) 1989 Formula 305, with a 5-speed transmission and a Borg Warner 3.44 rear axle (also in stages of restoration) and (1) 1989 Formula 350, waiting in line for its full-blown restoration. All eight possess TPI engines.

I only acquired the white 1992 Trans Am convertible a few months ago. A previous owner has badged it as a GTA, which we all know is not correct, but for the time being I will leave it as is so as not to risk damaging paint to remove them. Also, the car was born with a 305 TPI, but somewhere in its dubious history it received an engine swap to a 350 TPI. No new convertible ever received a 350. I have plans to add sub-frame connectors to stiffen the chassis because this bad boy does LIKE to go down the street!

The two 1991 red convertibles and the 1992 white convertible were all originally ordered by and delivered to Pontiac Corporate Headquarters and then later put out for auction. I’m not clear what Pontiac Division did with the cars while they were in their possession. The third 1991 Trans Am Convertible, white with black leather, was delivered to and owned by the owner of a Pontiac dealership in Ohio. Restoration on it has not been started.

The two red convertibles and the green 350 Formula have had extensive restoration/preservation work accomplished 100% in our home shop. Engines have all been completely machined with all new internal parts, rotating assembles all weighed and balanced. All have received new sensors, injectors, MSD distributors, etc. Transmissions have been rebuilt with heavy duty internals to produce a positive shift. All the suspension parts, including rear axle housings, have been sent out for sandblasting and powder coating. All the under floor pans, gas tanks, engine bays have been thoroughly cleaned and repainted. All suspension components have received new bushings, new steering linkages, new ball joints, springs, new shocks/struts, new universal joints, brakes and anything else needed to make these old bad boys as good as, or better than when new. Four of the flock are tagged and insured, but only driven in 100% fair weather. The only item I have deviated from factory original is the exhaust systems: Magnaflow seems to suite them well

It has been a pleasure to work on these fantastic old cars. They draw a lot of attention and admiration whenever they get out to go play. It is amazing how many people admire the convertibles and comment that they have NEVER seen one before. Small wonder since so few were built and even fewer now are still in existence, especially in pristine condition.

The above is a quick and very short version of how and why these cars have, or are, transitioning back to their original awe. I appreciate and have enjoyed the Eagle these past few years and look forward to many more issues.


What To Do With a 40 Year Old Trans Am

by Chuck Lincoln

I refer you all back to an article from the January 2010 issue of the National Firebird and Trans Am Club Eagle. I am the original owner of a 1976 Trans Am. Living in Upstate NY and wanting to “keep this car for its life;” it has not seen a Syracuse (a.k.a. “The Salt City”) Winter – stored every year since I have owned it. This year I decided to take it into a local, full service speed shop (White’s Auto & Speed, Cicero, NY) to discuss what critical maintenance needed to be done to a 40 year old car with 120,000 miles on it. As we put it up on the rack, one could see that all the rubber bushings and spacers were shot – dry rot mostly; some even gone. So we elected to get the Energy Suspension bushing & frame kit and replace them all. Also, it was also noted that the engine was leaking oil. Leaks were coming from the valve covers, oil pan, intake tray, timing cover, around the fuel pump, the rear engine seal and a few other places. So we also purchased the engine gasket kit.

As we totally took the front suspension apart, we decided to replace other worn items: upper & lower ball joints, new front shocks (the third set for this car), and coil spring isolators. While most of this stuff is boring, it needed to be done and should bring the handling to better than Factory original. While this work was contemplated, it was determined that in order to properly get at the rear engine seal, the engine would have to come out of the car. So once the engine (a 400 cu. in. Pontiac engine) was out of the car, we did a leakdown (compression) check which revealed that four of the cylinders (1, 8, 4, & 7) were leaking 30%. Two more, 2 & 5 were at ~ 23% blow by. The normal guideline is < 20%. So we decided to consider an engine rebuild. Bore & hone all the cylinder walls, new oversized pistons & rings, polish the camshaft & crankshaft (keeping the original components), new connecting rods and main bearings, a valve job, new oil pump, new valve guides and new brass soft plugs. While removing the engine, we also removed the radiator – the original 2-core. We saw the condition and decided to recore the unit with a 3-core replacement as these Firebird engines were noted for their overheating issues.

While this was certainly a good plan, the 64 million dollar question was: “is the engine still in good enough shape to merit a rebuild?” As we took the engine apart, we all agreed that it was still in good enough shape the warrant a rebuild. This Pontiac engine is strong, all cast iron: block, heads, intake, etc. I have religiously changed the oil and have used nothing but Mobil 1 since the first oil change at 1,000 miles. While the cylinder walls had the expected wear ridges at the spot where the pistons reversed direction (< 0.006″), they were Bored then honed out 0.030″ and the pistons were replaced with oversized ones to accommodate this machining. The crankshaft was in great shape and needed to be just cleaned and polished std/std and fitted with new bearings. The camshaft was another thing. Three of the lobes were worn past their Factory specs and so we decided to replace it. We put in a new OEM camshaft to stay “original.” In the cylinder heads, three of the exhaust valve seats angles were out of spec – probably from the Factory, so all the valves and valve seats were machined back to original tolerances. Also, 3 of the valve guides were worn past Factory specs and were fitted with new valve guide inserts. The cylinder heads were also resurfaced .005″ for a good head gasket seal. All engine parts were dipped, cleaned and shot blasted and repainted the original Pontiac Blue. (see photo).

We also rebuilt the carburetor, which was the original Rochester Quadrajet 4-barrel carb and actually really didn’t need anything more than a good cleaning, but we did it anyway, while it was off the engine. [Note: I have always used HiTest gas in it.]

Before the engine came back together and went back into the car, we power washed, painted and detailed the engine compartment and overall spruced it up. We also changed the oil in the rear differential and 4-speed Muncie manual transmission. All looked well with both so no other work was done here. The clutch was fairly new and was in good shape. We also put in a new (rebuilt) starter as the electrical connections on the original one were pretty well shot.

Once I had the completed car back the first very noticeable improvement was how quiet it was cruising down the road. When I hit a bump, there were no more rattles and noises – those new bushings along with tightening things up really did the trick. Next was how much cooler the engine was running after obviously cleaning it all out and recoring the radiator, now much more efficient. The engine starts quicker, the choke engages properly (had always been a problem before) and it runs super smooth. As I presently have break-in oil in it, I haven’t yet really gotten on it to see what real performance improvement I gained, but more to come.

Also, since we put in all new bushings throughout the frame and steering suspension, I took it into a local body shop with new digital alignment equipment to insure that everything was properly aligned. My 1976 Trans Am has been given a new life with this expensive rebuild and will provide many, many more years of pleasurable driving and cruising. I am truly looking forward to it!

This is a story in progress with more to come (photos too). I made additions to this as the engine was being rebuilt.

’67 Firebird of Dan & Debbie Tietze “Freeda”

A National Firebird and Trans Am Club featured car is the ‘67 Firebird of Dan & Debbie Tietze from Firestone, Colorado. Here is their story:

We purchased our 1967 Firebird in 1997. It has always been a Colorado car, originally sold in Grand Junction, Colorado. Although the cosmetics were in sad shape, it was a rust free car. After having an interior kit installed and the body stripped; Freeda, as we call her, was sprayed in her original color – Cameo Ivory. She has a bright blue interior. We enjoyed the car along with our 1971 GTO convertible.

 In 2008, after the GTO went by the wayside, I decided to pull Freeda’s original 326 engine, which is now stored. I replaced the engine with a nicely built 400 YT code engine with factory crank, speed pro rings and pistons, Eagle connecting rods and Crane cam. The 6X heads were treated to some port work and three angle valve job, and an Edelbrock intake with a 750 Holley dual feed. Cooling is taken care of by a Meziere water pump, 16″ electric fan and a Griffin radiator. The original 350 turbo was built by Ram Transmission Gear and underneath the front drums were replaced with a Hurst roll control and Wilwood disc brake system and also rebuilding the front steering components. Quick Time performance servo controlled exhaust cut-outs and FloMaster mufflers, and Competition engineering subframe connectors. The ten bolt third member is loaded with 3.55 gears and of course body bushings will Edelbrock INS shocks for handling.

Freeda enjoys some car shows and going to Sonic Burger Friday nights, seeing other muscle cars – some oldies but goodies and even some rat rods. Freeda was built in Lordstown, Ohio, not fifty miles from where I was born. Colorado lets you run the year license plate of your car in place of your collector plates.

My wife and I will enjoy Freeda until the bitter end.

Happy cruisin’

’79 Trans Am of Michael Bartholomew

I am forwarding some photos of my 79 T/A which I hope some of which you will put in the member magazine.

Car info:
1979 Trans Am
Automatic Transmission
403 olds engine
AM/FM/8-Track Radio
CB Radio
Space Saver Spare Tire

 When I first found this Bird, I really wasn’t looking for a car from this era. After bringing her home, I quickly fell in love and this car can also be credited with starting my love affair with Pontiac. It accompanies my daily driver, a ‘64 Bonneville, in the stable. From early on, this car has been on a journey to go “back to factory” replacing a ‘77 nose that had been placed on it with the proper ‘79 nose among other changes that the previous owner had made. One of my favorite “upgrades” that I’ve made is getting the snowflake wheels with reproduction period correct tires put on all 4 corners. Over the years, I’ve enjoyed shows and cruises with my kids, but also introducing them to things like 8-Tracks, the CB, and getting dirty under the hood. I look forward to many more years of fun!

Michael Bartholomew
Dunedin, Florida

2002 Trans Am WS6 of George Bravo

A National Firebird and Trans Am Club featured car is the 2002 Trans Am WS6 of George Bravo from Marina, California. Here is his story:

This is my 2002 Trans Am WS6 which I changed the brake rotors to cross drilled front and rears. I installed the Lambo doors myself. It has the high performance super chip program on it. It has a Hurst 6 speed shifter. I also added sequential turn signal lights to it. I put the racing stripes on myself. I changed the ram air decals to chrome ones. I also changed the ram air grills to chrome ones. I didn’t want to get rid of my front chrome Firebird because I live in California that requires the front license plate, so I installed a front license plate that retracts to hide under the front bumper and it also displays my front license plate from a remote control key chain. I am a Marine Veteran who plans to work more on my Trans Am and to keep taking my Trans Am to car shows. I hope you enjoy these photos, I’ll post more at a later time.

2002 Trans Am WS6 of George Bravo
2002 Trans Am WS6 of George Bravo
2002 Trans Am WS6 of George Bravo

2002 Trans Am WS6 of George Bravo

‘89 Turbo Trans Am of Robert Rogacki from Westchester, Illinois

A National Firebird and Trans Am Club featured car is the ‘89 Turbo Trans Am of Robert Rogacki from Westchester, Illinois. Here is his story:

My 1989 Turbo Trans Am – 20th Anniversary – Pace Car replica for the 73rd. Indianapolis 500 is car number 265 out of the 1550 made. This was the first car to pace the race that did not require engine modifications. The cars were all built as GTA‘s sent from General Motors to PAS in California to be modified. The car has the Buick Grand National 3.8L V6 engine, brakes are the 1LE option and it has a Borg Warner Australian rear end. There were only two options available on the car T-Tops and leather interior I have both. I am the fourth owner; the car has 18,150 miles and is all original / stock except for a couple of chrome pieces under the hood and the white face gauges. All changes were made by owner number two. The car was original purchased in Connecticut, owners two thru four all live in Illinois and are separated by less than twenty miles. I found the car at a local car show in September of 2010.

I should also mention I have an all original / stock 1987 Buick Grand National with 14,886 miles.

'89 Turbo Trans Am of Robert Rogacki  '89 Turbo Trans Am of Robert Rogacki    '89 Turbo Trans Am of Robert Rogacki  '89 Turbo Trans Am of Robert Rogacki